Features and Benefits
• Simple, fast sizing
• Range curves and selection charts generated from actual R&D tests.
• Kits configured for 30 Hz minimum and 80 Hz maximum operation.
• Kits use mismatched water end and motor (see component chart).
• Wiring is as easy as standard three-wire control box:
   - L1, L2 and Ground in from power supply
   - Red, Yellow, Black and Ground out to motor
• Pressure is factory preset at 50 psi with simple, fast, field adjustability for higher pressures.
• Three phase output to motor reduces wire cost.
• Goulds model GS features the Guardian bearing system and field proven sand and abrasive handling floating stack design.
• New - a Switch Input for connecting a pressure switch or float switch.
• New - Grounding provisions for transducer and transducer cable.

Applications
A variable speed controller complete with a water end (pump) and three phase motor conveniently packed in one carton for installer convenience. Kits are available with 2, 3 or 5 HP controllers and motors from 1.5 to 5 HP. They feature pump/motor combinations sized for high speed operation, units are configured to operate between 30 and 80 hertz.

Support Documents
Product Bulletin – 30-80 Hz Kits - BGPROPAK
Product Bulletin 30-60 Hz Kits - BG30-60PROPAK
Product Brochure - 30-80 Hz Kits - BRGPROPAK
Instruction Manual - IM182
BF SET-UP SHEET
BF Repair Parts List - RPBFAB